Flame‐retardant expandable polystyrene foams coated with ethanediol‐modified melamine–formaldehyde resin and microencapsulated ammonium polyphosphate
作者：Sheng Zhang, Wenfei Ji, Yi Han, Xiaoyu Gu, Hongfei Li, Jun Sun*
關鍵字：coatings, foams, polystyrene, resins, thermal properties
論文來源：期刊
具體來源：Journal of Applied Polymer Science. 2018. 135(28) 46471.
發表時間：2018年
Melamine–formaldehyde resin was modified by ethylene glycol to decrease the amount of free formaldehyde and extend the storage time. The modified resin (EMF) was further used to prepare microencapsulated ammonium polyphosphate (MCAPP). The structures of both EMF and MCAPP were well characterized. Afterward, EMF and MCAPP were mixed and coated on the surface of pre‐expanded polystyrene particles to prepare flame‐retardant expandable polystyrene foams (EPS). Both water resistance and impact strength were enhanced by the presence of MCAPP, and the flammability of the samples was also significantly improved. For the sample containing 75 phr MCAPP, the limiting oxygen index value was increased to 31.4% with a V‐0 rating in the UL‐94 vertical burning test. Cone calorimeter tests showed that the peak heat release rate of the sample declined sharply to 172.7 kW/m2, which is 81.6% lower than that of neat EPS. The smoke production of EPS foams during combustion was suppressed by the presence of MCAPP, and the thermal stability was also improved. Scanning electron microscopy showed that the char layer of the flame‐retardant sample after combustion became compact with negligible voids or cracks, which could further form an isolation barrier to prevent both heat and flame transfer.